Skip to content
Zenova Kimya home page
ZN-300 Series

Clear Coats

Deep gloss, UV resistance and lasting surface protection.

View the 3 productsRequest a quote
Zenova ZN-310 2K Acrylic Clear Coat packaging

Two-component acrylic clear coats for the final layer, available in standard, MS (medium-solids) and HS (high-solids) versions.

The clear coat is the vehicle's first point of contact with the outside world. As well as determining gloss, depth and colour tone, it acts as a shield against UV radiation, chemicals and scratches.

The Zenova clear coat series comes in three performance levels: the balanced, fast-drying 2K Acrylic Clear Coat; 2K Acrylic MS Clear Coat, which optimises workshop efficiency and the cost/performance balance; and the premium 2K Acrylic HS Clear Coat, which offers high film thickness in a single coat and glass-like depth. Each clear coat is used with a hardener specifically matched to it.

The right choice of clear coat depends on the nature of the job, the baking capacity, the need for polishing and the expected quality of finish. Our product comparisons and application systems make this decision easier.

  • Deep gloss

    Excellent flow for a glass-like, ripple-free appearance.

  • UV resistance

    Long-lasting protection of colour and gloss against sunlight.

  • Scratch resistance

    A hard surface that stands up to washing and everyday use.

  • Easy polishing

    Dust nibs and minor defects are easily removed.

Clear Coats · 3 products

Our Clear Coats

Click a product card to see its technical data, application steps and compatible products.

  • Zenova ZN-310 2K Acrylic Clear Coat packaging
    2K
    Clear CoatZN-310

    2K Acrylic Clear Coat

    Standard 2K acrylic clear coat (2 : 1) for automotive repair and industrial surfaces; dries fast and offers strong UV protection and high chemical resistance.

    View product
  • 2K
    Clear CoatZN-320

    2K Acrylic MS Clear Coat

    Medium-solids (MS) 2 : 1 acrylic clear coat; fast drying and easy polishing combine workshop efficiency with a sound cost/performance balance.

    View product
  • 2K
    Clear CoatZN-330

    2K Acrylic HS Clear Coat

    High-solids 2 : 1 HS clear coat for top-quality repairs; delivers high film build in 1.5 coats, glass-like depth and superior scratch resistance.

    View product
Comparison

Clear Coat comparison table

Quickly compare the products by component type, suitable surfaces and pack sizes.

Clear Coat comparison table
ProductComponentsSuitable surfacesPackagingDetails
ZN-3102K Acrylic Clear Coat2KSteel panel, Galvanised steel, Aluminium, Plastic, GRP / Fibreglass, Existing paintwork1 L · 5 LView
ZN-3202K Acrylic MS Clear Coat2KSteel panel, Galvanised steel, Aluminium, Plastic, GRP / Fibreglass, Existing paintwork1 L · 5 LView
ZN-3302K Acrylic HS Clear Coat2KSteel panel, Galvanised steel, Aluminium, Plastic, GRP / Fibreglass, Existing paintwork1 L · 5 LView
Chemistry and technology

2K acrylic polyurethane clear coat

The clear coats cure through the cross-linking of an acrylic polyol resin with an aliphatic polyisocyanate hardener. The aliphatic structure does not yellow in sunlight, while the UV absorbers and light stabilisers (HALS) used in automotive clear coats protect the colour of the basecoat underneath.

Use the clear coat only with its matching hardener; because the mixture contains isocyanates, suitable respiratory protection is required. Environment, health and regulatory guide

  • Standard, MS and HS

    The higher the solids content, the greater the film thickness achieved per coat and the lower the solvent content. HS clear coat delivers great depth in 1.5 coats.

  • Curing and baking

    At 20 °C the reaction is complete within hours; at 60 °C object temperature, assembly-ready hardness is reached in approximately 30 min.

  • Flow and gloss

    Application viscosity (DIN 4 cup) and the flash-off time between coats determine the risk of orange peel, sagging and solvent popping.

  • Chemical resistance

    The fully cured polyurethane network protects the surface against fuel, detergents, bird droppings and road chemicals.

Frequently asked

Questions about Clear Coats

Answers to the most frequently asked questions about this product group.

Should I choose HS or MS clear coat?

If you want a premium appearance, high film thickness and fewer coats, ZN-330 2K Acrylic HS Clear Coat is the right choice; if a fast workflow and the cost/performance balance are the priority, choose ZN-320 2K Acrylic MS Clear Coat.

Can it be used with a different hardener?

Each clear coat has been tested together with its own hardener. Using a different hardener can adversely affect drying, gloss and durability; we recommend using the matching Zenova hardener.

How soon after applying the clear coat can it be polished?

Baked surfaces can be polished once they have cooled down; air-dried surfaces once they have fully cured. Please refer to the product's Technical Data Sheet (TDS) for exact times.

Other product groups

Let's build the right system for your workshop together

Talk to our team about product selection, application and pricing. We will quickly prepare the right system and quote for your needs.

Request a QuoteContact Us
Technical supportExpert answers to your application issuesDealership applicationRepresent Zenova in your region