1K
ThinnerZN-510
Acrylic Thinner
Balanced-evaporation thinner that brings 2K acrylic paints, clear coats and primers to ideal spray viscosity; reduces orange peel and ensures even flow.
View product
ZN-500 Series
Thinners
The right viscosity, flawless flow, a clean surface.
A thinner for 2K acrylic systems, a blending thinner for invisible transitions in spot repairs and a surface cleaning thinner for use before application.
Thinner is one of the least talked-about components of paint, yet one of those that most affects the result. A thinner with the right evaporation rate prevents orange peel, runs and dulling, and allows the paint to flow out evenly over the surface.
The Zenova thinner series focuses on three core needs: ZN-510 Acrylic Thinner brings 2K paints, clear coats and primers to the ideal spray gun viscosity; ZN-520 Blending (Fade-out) Thinner makes the transition between old and new clear coat invisible in spot repairs; and ZN-530 Surface Cleaning Thinner removes grease, silicone and wax residues before application, minimising the risk of cratering.
Ambient temperature and the size of the area being sprayed are the deciding factors when choosing a thinner. For special conditions, you can get support from our technical team.
Balanced evaporation
A controlled transition from flow to drying.
Even flow
Reduces the risk of orange peel and dry spray.
Invisible blend
Blending thinner leaves no noticeable edges in spot repairs.
Clean surface
The first line of defence against cratering caused by silicone and grease.
Thinners · 3 products
Our Thinners
Click a product card to see its technical data, application steps and compatible products.
- 1KThinnerZN-520
Blending (Fade-out) Thinner
Blending thinner that makes the transition between new clear coat and existing paintwork invisible in spot repairs; melts in overspray edges and eases polishing.
View product - 1KThinnerZN-530
Surface Cleaning Thinner
Removes grease, silicone, wax, tar and sanding dust before painting, priming and filling; cuts the risk of silicone craters (fisheyes) for more reliable adhesion.
View product
Comparison
Thinner comparison table
Quickly compare the products by component type, suitable surfaces and pack sizes.
| Product | Components | Suitable surfaces | Packaging | Details |
|---|---|---|---|---|
| ZN-510Acrylic Thinner | 1K | Steel panel, Galvanised steel, Aluminium, Plastic, GRP / Fibreglass, Existing paintwork | 1 L · 5 L | View |
| ZN-520Blending (Fade-out) Thinner | 1K | Existing paintwork | 1 L · 5 L | View |
| ZN-530Surface Cleaning Thinner | 1K | Steel panel, Galvanised steel, Aluminium, Plastic, GRP / Fibreglass, Existing paintwork | 1 L · 5 L | View |
Chemistry and technology
Thinner selection and evaporation balance
Thinners are solvent blends that dissolve the resin and adjust the spray viscosity. The balance of fast-, medium- and slow-evaporating components in the blend determines how the paint flows out over the surface and how quickly the solvent leaves the film.
Thinner vapours are flammable. Work in a well-ventilated area, away from naked flames and sources of sparks. Environment, health and regulatory guide
Viscosity adjustment
The correct thinning ratio regulates droplet size and flow, reducing orange peel and dry spray.
Evaporation rate
A thinner that evaporates too quickly seals the surface too early and causes dullness; one that evaporates too slowly leads to sagging and prolonged drying.
Blending thinner
Strong solvents melt the clear coat overspray mist into the existing paint, creating a blend zone that leaves no visible edge.
Cleaning thinner
A special blend that dissolves grease, silicone and wax and evaporates without leaving any residue on the surface; it is not used for thinning paint.
Frequently asked
Questions about Thinners
Answers to the most frequently asked questions about this product group.
Let's build the right system for your workshop together
Talk to our team about product selection, application and pricing. We will quickly prepare the right system and quote for your needs.