Industrial Chemical SolutionsPaint systems for automotive refinishing and industrial surfaces
Guides, technical articles, a glossary and documents: everything you need to know about paint technology, gathered in one place.
Choosing the right abrasive from filler to clear coat: P grit grades, a typical sanding sequence, the 100-grit rule, dry vs wet sanding and orbital sanders.
Read articlePainting in cold, humid weather: understand dew point and 2K curing, heat the booth and choose the right thinner and hardener to prevent drying problems.
Read articleHealth and safety in the paint shop: PPE against isocyanate and solvent exposure, ventilation, fire precautions, waste management and a checklist.
Read articlePaint defects guide: the causes, prevention and repair of nine defects, including orange peel, cratering, runs, pinholes and solvent popping.
Read articleInvisible spot repairs with blending thinner: zone planning, basecoat and clear coat blending, the fade-out step, polishing and common mistakes, step by step.
Read articleA practical technical guide to preparing galvanised steel and aluminium: oxide layers, galvanic corrosion, correct sanding, and choosing filler and primer.
Read articleTalk to our team about product selection, application and pricing. We will quickly prepare the right system and quote for your needs.